 |
 |
 |
|
The HD10CEA converts SDI/HD-SDI video with embedded audio to analog video and 4 channel balanced analog audio. SD video outputs can be configured as YPbPr (Betacam or SMPTE/EBU-N10), RGB, composite or YC (S-Video). HD video outputs can be configured as YPbPr or RGB. Analog audio outputs are balanced. The 4 audio channels can be selected from group 1-4. Audio and video output connections are available on a 25 pin "D" subminiature connector (breakout cable supplied). All video/audio configuration is done by external dipswitch selection. This versatile, low-cost, miniature monitoring solution also outputs two loop-thru SDI/HD-SDI outputs.
Note: Power Supply and Breakout cable included.
- Inputs: SDI/HD-SDI w/Embedded Audio, 1x BNC
- Outputs - SD Video: YPbPr - SMPTE, EBU-N10, Betacam, RGB, NTSC, PAL, YC (S-Video); HD Video: YPbPr, RGB; Audio: 4 Channel Balanced; Video/Audio Outputs on 25 Pin D Connector; 2 SDI/HD-SDI Equalized Loop-Thru, 2x BNC
- User Controls: External dipswitch, Video Format, Pedestal, H/V Blanking, Audio Group 1 - 4, Audio Level (adjustable via switch selection): +24, +18, +15, +12 dBu, Full Scale Digital
- Size: 5.8" x 3.1" x 1" (147 x 79 x 25mm)
- Power: +5-18VDC, Regulated, 4 Watts, Power Supply Included.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Digital to Analog Audio and Video Converter
- SDI/HD-SDI with Embedded Audio Input
- SD Component or Composite Video Outputs (SD Input)
- HD Component Video Outputs (HD Input)
- 4 Channel Balanced Audio Output
- 2 Equalized, Loop-Thru SD/HD-SDI Outputs
- Selectable Audio Channel Pair/Group
|
|
|
|
|
|
|
|
|
